Citizen CT-S651 Series

CT-S651 Series Service Manual
- 21 -
Remove two “SCREW, BHT (BT), M2.6 × 6” that fasten “SA, FRAME COVER UNIT-02” and “GUIDE,
HEAD HOLDER-02”.
12. Disassembling “UNIT, MOTOR”
Remove “SCREW, PHT (ST), M3.0 × 6” that fastens “SA, MAIN FRAME” and “UNIT, MOTOR”.
13. Disassembling “SA, POWER SW”
Pull “SA, POWER SW”, attached to “SA, MAIN FRAME”, toward the front while squeezing the right and
left sides of “SA, POWER SW”.
<Precaution at reassembly>
When reassembling, check the orientation of the switch.
“ON” (│) must be located in the right with “OFF” (O) in the left.
SCREW, PHT (ST), M3.0 × 6
Check the mounting orientation.
SCREW, BHT (BT), M2.6 × 6