9
Caution
• Do not install the product in dusty or humid places. This may cause re or an
electric shock, or damage the product.
• Do not install the product on an unstable surface. It may fall and cause injury
to the user or other people.
• Do not allow foreign objects to enter into the product. They may cause an
electric shock, a short circuit, a re, or damage the product. If something falls
into the product, immediately unplug the power cord, and then call a service
representative.
• Do not open the top door or remove the trash box during printing. This may
damage the product.
• Do not spill or spray liquids or chemicals onto the product.
• When cleaning the cover, do not use thinner, trichloroethane, benzene,
ketone-based cleaners, or chemically treated cloths. They could discolor or
deteriorate the cover.
• Take care to not cut, scratch, or hurt your hands the edges of the paper or on
any sharp edges within the printer.
• When putting your hands into the printer for removing the jammed paper or
cleaning, use safety lint-free gloves or other proper protective clothing to
prevent injury.
• At least once a year, unplug the power cord, and clean the prongs and the
plug. If dust accumulates, it may cause a re.
• When printing continuously for long periods in a small room, be sure to
ventilate the room properly.
• If you intend to use the product on a transportation vehicle (train, truck, ship,
etc.), please talk to a representative in advance.
• When disposing of the product, accessories, packaging materials, or media
(paper, ribbon), please abide by local waste removal ordinances. For details,
contact your local government oces.
• When unplugging the cord, always grip the plug. Do not pull on the cord as it
may damage the cord and cause an electric shock or re.
• When moving the product, be sure to unplug the power cord. Otherwise, the
cord may be damaged, which may cause re or an electric shock.
• For safety, when not using the product for an extended period of time, be
sure to unplug the power cord. Otherwise, it may cause an electric shock,
re, or a malfunction.
• Parts with this warning get extremely hot. Do not touch these parts after
printing. There is a danger of burns.
• Do not touch the gear mechanisms. There is a danger of injury if ngers get
caught in spinning gears.
• There is a cutter inside the paper output port. Do not insert hands inside the
paper output port regardless of whether or not the printer is operating.
• Do not look into the paper output port during printing. The edge of the paper
may poke your eye and cause injury.
• Do not touch the paper during printing. The edge of the paper may cause
injury.
For Safe Operation
To Next Page
Loading...
Need help?
General
