Citrix ADC MPX 5550 User Manual

Citrix ADC MPX
Use the BIOS POST code to detect errors
September 19, 2022
You can read the BIOS POST code by using the LOM GUI or the shell. To interpret the BIOS Beep
codes, see
https://www.supermicro.com/manuals/other/AMI_AptioV_BIOS_POST_Codes_for_SM_
Motherboards.pdf.
Read the BIOS post code by using the LOM GUI
Navigate to Miscellaneous > BIOS Post Snooping.
Read the BIOS post code by using the shell
At the prompt, type:
ipmitool raw 0x30 0x2a
Upgrade the LOM firmware on a Citrix ADC MPX appliance
October 18, 2022
Citrix has automated the upgrade of LOM firmware within Citrix ADC MPX soware. It is no longer
necessary to know your hardware platform or download any LOM firmware.
Note
This procedure requires two reboots to complete and therefore a disruption in production traic
is expected. Citrix recommends that you perform the upgrade during a maintenance window. In
a high availability setup, perform the upgrade on the secondary node to minimize disruption to
production traic. The upgrade_bmc.sh script is supported on the following platforms:
• MPX 5900
• MPX 8005
• MPX 8900
• MPX 11500
• MPX 11515
• MPX 14000
• MPX 15000
• MPX 22000
• MPX 25000
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 176

Citrix ADC MPX 5550 Specifications

General

Brand	Citrix
Model	ADC MPX 5550
Category	Network Hardware
Language	English