Citrix ADC MPX 5550 User Manual

Citrix ADC MPX
Hardware FAQs
September 19, 2022
Transceivers
• Are transceivers shipped with the appliance?
No. Transceivers are available for purchase separately. Contact your Citrix sales representative
to buy transceivers for your appliance.
• Why does the 10G SFP+ transceiver autonegotiate to 1G speed?
Autonegotiation is enabled by default on the 10G SFP+ ports into which you insert your 10G SFP+
transceiver. When a link is established between the port and the network, the speed is autone-
gotiated. For example, if you connect the port to a 1G network, the speed is autonegotiated to
1G.
• Can I insert a 1G transceiver into a 10G slot?
– Only MPX 14000 and MPX 25000 appliances support copper transceivers.
– The 10G slot supports copper 1G transceivers, which can operate at up to 1 Gbps in a 10
Gbps slot.
Note: 10G transceivers are not supported in 1G slots.
The following table shows the compatibility matrix of transceivers and ports available on the
Citrix ADC appliance.
Ports/Transceivers 10G transceiver 1G fiber transceiver 1G copper transceiver
10G port Supported Supported with
exceptions (see note)
Supported
1G fiber port Not Supported Supported Not Supported
1G copper port Not Supported Not Supported Supported
Note:
The following appliances do not support the 1G fiber transceiver in a 10G port.
• MPX/SDX 89xx
• MPX/SDX 89xxT
• MPX/SDX 15xxx-50G
• MPX/SDX 14xxx-40G
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 212

Citrix ADC MPX 5550 Specifications

General

Brand	Citrix
Model	ADC MPX 5550
Category	Network Hardware
Language	English