Citrix ADC MPX
How to verify the file system integrity of your Citrix ADC MPX appliance
September 19, 2022
Complete the following procedure to verify the file system integrity of the Citrix ADC MPX appliance.
1. Connect a console cable to the serial console of the ADC appliance, which is 9600 baud, 8 bits,
1 stop bit, and No parity.
2. Restart the appliance.
3. Press Ctrl+C keys simultaneously when you see the message Booting [/ns-12.1-60.19]
counting down from 2 to 1 second. At the OK prompt, type ? to show available com-
mands.
4. Type boot -s to start the kernel in single user mode.
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 204
To Next Page
Loading...
