C
A
B
V
163
BONNET RELEASE
This operation should only be
performed when the vehicle is
stationary.
To unlock the bonnet, pull towards
you the control A located under
the dashboard.
Note : the driver’s door has to be
open for you to be able to action
the control.
Move the lever B, located at the
top of the grille to the right of the
chevrons, then raise the bonnet.
Bonnet stay : detach the stay C
and pivot it upwards to insert it
into the notch.
To close the bonnet
Move the stay C back to its initial
position, lower the bonnet and
then allow it to slam shut.
Check that the bonnet is locked.
Avoid opening the bonnet in high winds.
To Next Page
Loading...
