1
II
63
Selector position
The position of the selector is displayed in the in
strument panel, on the left
on multifunction screens A and C, on the right on multifunction screen DT.
A position grille relating to the selector allows you to vie
w the position that
is selected.
For safety :
• Position P can be disengaged only if you press the brake pedal
.
• When a door is opened, a sound signal is heard if the
selector is not in position
P.
• Always make sure that the selector is in position P before you leave your vehicle.
If the gearbox is in position P but the position of the selector is different, reposition
the selector on
P so that you
can start the vehicle.
The automatic gearbox gives you
a choice of two driving modes :
- automatic mode,
- sequential mode.
AUTOMATIC GEARBOX -
GENERAL
Mode selection :
- automatic mode : selector 1 in position D.
- sequential mode : selector 1 in position M.
Multifunction display A Multifunction display DT
To Next Page
Loading...
