A
A
II
41
Reset to zero
Your CITROËN technician resets the indicator to zero after each service.
However, if you do your own servicing, the procedure for resetting to zero
is as follows :
- Switch off the ignition, then turn the key to position S, steering lock.
- Press on button A and keep it pressed.
- Switch on the ignition.
- Keep button A pressed until the screen indicates a zero and the mainte-
nance symbol disappears.
- Switch off the ignition.
Maintenance intervals
If you use your vehicle in particularly
difficult conditions, it is essential to
have recourse to the service sched-
ule for driving in conditions, compris-
ing shorter intervals between services
(see the Maintenance Guide).
MAINTENANCE INDICATOR
Mono-tone or
Bi-tone
instrument panel
NaviDrive
instrument panel
To Next Page
Loading...
