II
51
Multifunction screen A
The trip computer gives you 5 types
of information accessible by succes-
sive presses on the control stalk.
• Range
• Instantaneous consumption
• Distance travelled
• Average consumption
• Average speed
To cancel the display of the trip
computer information, press a fifth
time.
Multifunction screens C and
DT
The trip computer gives you ac-
cess to 3 types of instantaneous
information :
- Range
- Instantaneous consumption
- Distance remaining to be travelled
It also gives you access to 3 types
of information for two Journeys
1 and 2 :
- The distance travelled
- The average consumption
- The average speed
The Journeys
Journeys 1 and 2 are independent
of each other but identical in use.
For example they allow you to al-
locate journey 1 for daily calcula-
tions and journey 2 for monthly
calculations.
Setting a Journey to zero
When the relevant Journey is dis-
played, give a long press on the
end of the wiper control stalk.
To access display and selection
of the various types of informa-
tion, give short presses on the
end of the windscreen wiper con-
trol stalk.
For multifunction screen C and DT,
a press on the «Mode» button will
display the trip computer informa-
tion permanently.
To reset the trip computer infor-
mation to zero, press continuously
for a few seconds on the end of the
control stalk when one of the types
of information is displayed.
TRIP COMPUTER
To Next Page
Loading...
