CITROEN 2015 Berlingo Multispace User Manual

174
Berlingo-2-VP_en_Chap08_Aide-rapide_ed02-2015
Changing a wheel
Berlingo-2-VP_en_Chap08_Aide-rapide_ed02-2015
4. Procedure
- Placethefootofthejackincontact
with the ground directly below the
jackingpointclosesttothewheelto
bechanged.
- Extendthejackuntilitshead
comesintocontactwiththejacking
point used; the vehicle's contact
area Amustbeengagedwiththe
headofthejack.
- Raise the vehicle until there is
sufcientspacebetweenthewheel
and the ground, so that
(not punctured) spare wheel can be
easilytted.
- Resumeandcompletethe
unscrewingofthewheelbolts.
- Removetheboltsandremovethe
wheel.
- Removethewheeltrim.
- Loosen the wheel bolts and start
unscrewingthem.
Ensurethatthejackisstable,thefoot
ofthejackmustbeincontactwiththe
ground,anddirectlybelowthejacking
pointused.
If the ground is slippery or loose, the
jackmayslipordrop-Riskofinjury!
Ensurethatthejackispositionedonly
atoneofthejackingpointsunderthe
vehicle,makingsurethatthevehicle's
contact surface is centred on the head
ofthejack.
Otherwisethereisariskofdamage
tothevehicleand/orofthejack
dropping-Riskofinjury!
Donotextendthejackuntilyouhave
started unscrewing the bolts on the
wheel to be changed and have placed
thechockunderthewheeldiagonally
opposite.

CITROEN 2015 Berlingo Multispace Specifications

General

Brand	CITROEN
Model	2015 Berlingo Multispace
Category	Automobile
Language	English