CITROEN 2015 Berlingo Multispace - Page 177

175
QUICK HELP
8
Berlingo-2-VP_en_Chap08_Aide-rapide_ed02-2015
Changing a wheel
Berlingo-2-VP_en_Chap08_Aide-rapide_ed02-2015
- Position the wheel on the hub and
starttighteningtheboltsbyhand.
- Carry out an initial tightening of the
boltsusingthewheelbrace.
5. Fitting the spare wheel
- Lowerthevehiclecompletelyby
foldingthejack,thenremovethe
jack.
- Tighten the bolts again using the
wheelbrace,tightenthemfully
withoutforcingthem.
- Place the wheel to be repaired in
thecarrier.
- Securethecarrieronthehookthen
raise the carrier by tightening the
boltwiththewheelbrace.
- Fullytightenthebolt,thencheck
thatthewheelisheldatagainst
theoor.
If this is not the case, repeat the
operation.
Never go underneath a vehicle
thatissupportedonlybyajack
(useastand).
Never use a power driver in place of
thewheelbrace.