CLUTCH
GEARBOX
DRIVESHAFTS
148
MA/5 GEARBOX CONTROLS
Engines : HFX - KFV - NFU - 8HX
Adjustment.
WARNING: Do not use any tool to detach the
ball-joints.
The gear selection control and gear engagement control
cables cannot be adjusted.
To unlock the ball-joint, press at «a» then pull the
ball-joint upwards.
To release the sleeve stops, pull the needles «b», in the
direction of the arrow, then disengage the sleeve stops
from their supports.
B2CP3J1D
B2CP3J0D
To Next Page
Loading...
