AXLE GEOMETRY
Measure the radius of the front wheel R1 - Calculate dimension H1 = R1 – L1
Z1 = Measuring zone underneath the front subframe.
[1] Gauge for measuring the wheel radius, 4 bolts, tool 8006-T
Measuring rear heightMeasuring front height
Z2 = Measuring zone underneath the rear sill.
Measure the radius of the rear wheel R2 - Calculate dimension H2 = R2 + L2
Compress the suspension to obtain the calculated values.
The height difference between the two axle dimensions should be less than 10 mm.
(*) = CRD : Difficult road conditions.
Value at reference
height
(+ 6 - 8 mm)
Except CRD (*)
Except CRD (*)
L1 = 142.5 mm
HFX - KFV - 8HX
L1 = 152.5 mm
NFU
Value at reference
height
(+ 10 - 6 mm)
L2= 52 mm
HFX - KFV - 8HX
L2= 42 mm
NFU
B3CP07SD
157
AXLES
SUSPENSION
STEERING
To Next Page
Loading...
