CITROEN C2 2003 - 8 HX Engine Specifications

198 pages

To Next Page

To Previous Page

ENGINE

ENGINE SPECIFICATIONS

Engine : 8HX

Engine identification

"a" Engine legislation type.

"b"Component reference.

"c" Factory serial no.

B1CP0BKD

Main Page

Identification of Vehicles3
Manufacturer's Plate6
Factory Code7
Exterior Dimensions8
General Specifications8
Interior Dimensions and Volumes9
General Specification: Weights10
Operations to be Carried out after a Repair11
Towing the Vehicle13
Vehicle Towing: Precautions14
Piloted Manual Gearbox15
Lifting and Supporting the Vehicle17
Capacities (in Liters)19
Draining Method19
Lubricants - Total Recommended Oils21
Total Activa22
Total Quartz22
- ACEA/API Norms23
- Blended Oils for All Engines, Permitting Fuel Economy23
- Blended Oils for All Engines, Permitting Fuel Economy25
Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines25
- Blended Oils for All Engines, Permitting Fuel Economy26
- Total Recommended Oils: France26
- Blended Oils for All Engines, Permitting Fuel Economy27
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines27
- Total Recommended Oils: Europe27
- Blended Oils for All Engines, Permitting Fuel Economy28
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines28
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines29
- Total Quartz Diesel30
Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines30
Blended Oils for All Engines, Permitting Fuel Economy31
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines31
- Lubricants: Gearbox/Power Steering Oils33
- Lubricants: Engine Coolant/Citroen Hydraulic Circuit Fluid34
- Lubricants: Wash/Wipe Fluid and Grease35
- Engine Oil Consumption36
- Engine Specifications37
- Cylinder Head39
- Special Features: Tightening Torques41
- Tightening Torques: Power Unit Suspension44
- Engine 8HX Identification45
- Cylinder Head Tightening/Bolts46
- Tightening Torques: Crankshaft Mobile47
- Tightening Torques: Cylinder Head/Engine Flywheel48
- Tightening Torques: Lubrication/Diesel Injection/Cooling Circuit49
- Power Unit Suspension50
- Belt Tension/Seem Units Correspondence Table51
- Auxiliary Equipment Drive Belt52
- Auxiliary Equipment Drive Belt: Remove/Refit53
- Auxiliary Equipment Drive Belt with Compressor and Alternator55
- Markings on the Dynamic Tensioner Roller56
- Engine 8HY Removing/Refitting57
- Checking and Setting the Valve Timing58
- Engine NFU60
- Setting the Timing61
- Timing Belt Overtensioned67
- Adjusting the Fitting Tension of the Timing Belt68
- Setting the Valve Timing (Engine 8HX)71
- Tools for Checking Setting the Valve Timing (Engine 8HY)77
- Setting the Timing (Engine 8HY)82
- Checking the Setting (Engine 8HY)83
- Exhaust Specifications86
- Axle Geometry159
- Front Axle161
- Rear Axle162
- Brake Specifications173

CITROEN C2 2003 - 8 HX Engine Specifications

Table of Contents

Related product manuals