CITROEN C2 2003 - Exhaust System Specifications

198 pages

To Next Page

To Previous Page

EXHAUST SPECIFICATIONS

Engines: HFX - KFV (Depollution L4)

B1JP03TD

ENGINE

«a» Cutting zone

Main Page

Identification of Vehicles3
Manufacturer's Plate6
Factory Code7
Exterior Dimensions8
General Specifications8
Interior Dimensions and Volumes9
General Specification: Weights10
Operations to be Carried out after a Repair11
Towing the Vehicle13
Vehicle Towing: Precautions14
Piloted Manual Gearbox15
Lifting and Supporting the Vehicle17
Capacities (in Liters)19
Draining Method19
Lubricants - Total Recommended Oils21
Total Activa22
Total Quartz22
- ACEA/API Norms23
- Blended Oils for All Engines, Permitting Fuel Economy23
- Blended Oils for All Engines, Permitting Fuel Economy25
Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines25
- Blended Oils for All Engines, Permitting Fuel Economy26
- Total Recommended Oils: France26
- Blended Oils for All Engines, Permitting Fuel Economy27
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines27
- Total Recommended Oils: Europe27
- Blended Oils for All Engines, Permitting Fuel Economy28
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines28
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines29
- Total Quartz Diesel30
Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines30
Blended Oils for All Engines, Permitting Fuel Economy31
- Oils Specifically for Petrol and Dual-Fuel Petrol / LPG Engines31
- Lubricants: Gearbox/Power Steering Oils33
- Lubricants: Engine Coolant/Citroen Hydraulic Circuit Fluid34
- Lubricants: Wash/Wipe Fluid and Grease35
- Engine Oil Consumption36
- Engine Specifications37
- Cylinder Head39
- Special Features: Tightening Torques41
- Tightening Torques: Power Unit Suspension44
- Engine 8HX Identification45
- Cylinder Head Tightening/Bolts46
- Tightening Torques: Crankshaft Mobile47
- Tightening Torques: Cylinder Head/Engine Flywheel48
- Tightening Torques: Lubrication/Diesel Injection/Cooling Circuit49
- Power Unit Suspension50
- Belt Tension/Seem Units Correspondence Table51
- Auxiliary Equipment Drive Belt52
- Auxiliary Equipment Drive Belt: Remove/Refit53
- Auxiliary Equipment Drive Belt with Compressor and Alternator55
- Markings on the Dynamic Tensioner Roller56
- Engine 8HY Removing/Refitting57
- Checking and Setting the Valve Timing58
- Engine NFU60
- Setting the Timing61
- Timing Belt Overtensioned67
- Adjusting the Fitting Tension of the Timing Belt68
- Setting the Valve Timing (Engine 8HX)71
- Tools for Checking Setting the Valve Timing (Engine 8HY)77
- Setting the Timing (Engine 8HY)82
- Checking the Setting (Engine 8HY)83
- Exhaust Specifications86
- Axle Geometry159
- Front Axle161
- Rear Axle162
- Brake Specifications173

CITROEN C2 2003 - Exhaust System Specifications

Table of Contents

Related product manuals