21
GENERAL
LUBRICANTS – TOTAL recommended oils
Selection of engine oil grades recommended for climatic conditions in countries of distribution
ACEA Norms
The first letter corresponds to the type of engine concerned :
A : petrol and dual fuel petrol / LPG engines.
B : diesel engines.
The figure following the first letter corresponds to the type of oil.
1 : highly fluid oils, for reducing friction and lowering fuel
consumption.
3 : high performance oils.
The number after that (96 or 98) corresponds to the year of
creation of the norm.
NOTE : From 01/03/2000, all engine oils must comply with ACEA-98
norms.
Example :
ACEA A1-98 / B1-98 : Blended oils for all engines, permitting fuel
economy (complying with ACEA 98 norms).
API Norms
The first letter corresponds to the type of fuel used by the engine :
S : petrol and dual fuel petrol / LPG engines.
C : diesel engines.
The second letter corresponds to the degree of evolution, in ascending
order.
Example : The norm SJ is more severe than the norm SH and corres-
ponds to a higher level of performance.
The adding of the letters EC indicates that the engine oil concerned is
an oil which permits fuel economy.
EC : Energy Conserving, reduction in fuel consumption.
Examples :
API SJ / CF : Blended oils for all engines.
engines API CF / EC: Oils specifically for diesel engines, permitting fuel
economy.
API SJ / CF / EC : Blended oils for all engines, permetting fuel economy.
To Next Page
Loading...
