BRAKES
BRAKE SPECIFICATIONS
Braking circuit with ABS - REF
(a) Hydraulic circuit.
(b) Electrical circuit.
(1) Master cylinder in tandem.
(2) Braking servo.
(3) Brake caliper (or drum at the rear).
(4) Hub equipped with a bearing with an integral magnetic wheel
(48 pairs of poles).
(5) Wheel sensor.
(6) Brake fluid level sensor.
(7) Hydraulic block plus ECU.
(8) Stoplamp switch.
(9) Instrument panel.
(10) Diagnostic socket.
(11) Built-in systems interface (BSI).
B3GP02RP
171
To Next Page
Loading...
