BRAKES
172
BRAKE SPECIFICATIONS
(7) Hydraulic block
ElementsRef.
Supplier
Part No.
Observations
B3FP7BVC
Mounted on the front LH chassis member.
4 adjustment channels
26-way connector.
Integral to the hydraulic block
2-way blue connector.
The sensors are inductive-type.
Mounted on the pivot.
Non-adjustable airgap: 0,16 to 1,6 mm.
Tightening torque: 0,8 ± 0,2 m.daN
2-way blue connector.
The sensors are inductive-type.
Mounted on the suspension arm.
Non-adjustable airgap: 0,35 to 1,6 mm.
Tightening torque: 0,8 ± 0,2 m.daN
Hub equipped with a bearing with an integral
magnetic wheel (48 pairs of poles).
Hydraulic
block
ECU
Front wheel
sensor.
Rear wheel
sensor.
Hub bearing. SNR
TEVES
7
5
4
ABS MK 70
96 514 120 80
ESP -ABS MK.60
96 490 288 80
ABS MK.70
ESP -ABS MK 60
96 387 201 80
To Next Page
Loading...
