CITROEN C2 2003 - Valve Timing Checks and Setting; Valve Timing Checks (HFX-KFV-NFU)

55
AUXILIARY EQUIPMENT DRIVE BELT
Engine : 8HY
B1BP2MYD B1BP2MZC
Tools.
[1a] Dynamic tensioner roller lever : (-).0194-E1.
[1b] Lever extension : (-).0194-E2.
[2] Accessories belt roller locking peg Ø 4 mm : (-).0194-F
Removing
Pivot the tensioner roller support (1) (clockwise), using tools [1a] and [1b] at «a».
Remove the belt.
Immobilise the support (1) of the tensioner roller, using tool [2].
Remove the auxiliary drive belt (2).
IMPERATIVE : Ensure that the tensioner rollers turn freely
(no play, no tight spot).
Refitting
Refit the belt.
Move the tool [1] on the tensioner roller to remove the peg [2].
ESSENTIAL: Make sure that the belt is correctly positioned in the various pulley
grooves.
ENGINE