CITROEN C2 2003 - Cooling System Filling and Bleeding; Cooling System Draining Procedure

96
FILLING AND BLEEDING THE COOLING CIRCUIT
HFX-KFV-NFU
8HX
Tools
[1] Filling cylinder : 4520-T
[2] Adaptor for filling cylinder : 4222-T.
[3] Pliers for removing-refitting elastic clips : 9029-T
Draining.
Perform the operation with the engine cold.
Remove the air filter housing.
Open the expansion chamber cap.
Uncouple bottom hose (1), using tool [3] and bottom hose (2) of the radiator.
Open :
The bleed screw on the coolant outlet housing.
The bleed screw on the heater matrix.
The cylinder block drain plug.
Allow the coolant to flow out.
Before any refilling, rinse the cooling circuit with clean water.
Couple the bottom hose (1) and (2).
B1BP2LUC B1GP0AQD
ENGINE