21
Dashboard instruments
1
With the lamps on, press button A to increase
the brightness of the lighting, or button B to
decrease it.
Release the button when the desired brightness
is reached.
Touch screen
► In the Settings menu, select "Brightness".
► Adjust the brightness by pressing the arrows
or moving the slider.
The brightness can be set dierently for
day mode (lighting control stalk in
position "0") and night mode (lighting control
stalk in any other position).
Setting the date and time
Without touch screen
Set the date and time via the instrument panel
display.
► Press and hold this button.
► Press one of these buttons to select
the setting to be changed.
► Briey press this button to conrm.
► Press one of these buttons to change
the setting and conrm again to record
the change.
To Next Page
Loading...
