CITROEN C3 2022 - Switching on;Pausing

86
Driving
Activation/Deactivation
By default, the system is automatically activated
at every engine start.
The settings are changed via the
vehicle conguration menu.
Information displayed on
the instrument panel
The system is activated: "MAX" is displayed on
the instrument panel.
The information associated with speed limit
recognition is displayed after the trip computer
data.
To display it:
► Press the button located on the end of the
wiper control stalk.
► Press the thumbwheel located on the
steering wheel.
On detecting speed limit information, the system
displays the detected value, accompanied by a
message.
The driver can adjust the vehicle’s speed
according to the information given by the system.
A message is displayed and "MEM" ashes on
the display: with the speed limiter or cruise
control activated, the system suggests a speed
setting.
Operating limits
The system does not take account of reduced
speed limits, especially those imposed in the
following cases:
– Poor weather (rain, snow).
– Atmospheric pollution.
– Towing.
– Driving with a space-saver type spare wheel
or snow chains tted.
– Tyre repaired using the temporary puncture
repair kit.
– Young drivers.
The system may not display the speed limit if it
does not detect a speed limit sign within a preset
period and in the following situations:
– Road signs that are obstructed, non-standard,
damaged or bent.
– Obsolete or incorrect maps.
Storing the speed setting
In addition to Road signs recognition, the
driver can select the speed displayed as a speed
setting for the speed limiter or cruise control
using the speed limiter or cruise control 'store'
button.
For more information on the Speed
limiter or Cruise control, refer to the
corresponding sections.