Your radio will be subject to certain
phenomena that are not encoun-
tered by domestic systems.
The reception of AM and FM sig-
nals may suffer from interference,
which is caused by the nature and
propagation of the signals and
does not refl ect on the quality of
In AM, the reception may be
affected when passing under power
lines or bridges, or when travelling
In FM mode, the reception may
be affected by the distance from
the station transmitter, the refl ect-
ing of signals off obstacles (moun-
tains, hills, tower blocks) and radio
blackspots (no coverage from the
You can also do this by means of
banks FM1, FM2 and FM3, for
the FM waveband, and the mem-
ory banks MW/LW, for the AM
Manual search is via buttons
you will be able to scroll through
the waveband. Scrolling will stop
as soon as you release the button.
The radio will remain tuned to the
frequency that is displayed.
Automatic searches can be carried
out according to two levels of sen-
capture the most powerful
transmitters, choose the local
capture the weakest or most
distant transmitters, choose the
Search for a station is done fi rst in
” (local) sensitivity, then in “
To commence a search in sensi-
” (distant) immediately ,
press twice in succession on one
A short press on one of the buttons
will tune into higher or lower
radio stations respectively, within
you will be able to scroll through
the waveband. The scrolling will
stop at the fi rst station it fi nds once
You can also do this by means of
If the automatic search is unable to
tune into a known frequency (per-
haps owing to very weak recep-
tion), it is possible to search manu-
ally to fi nd this station.