C H A N G I N G A W H E E L
ACCESS TO THE SPARE WHEEL
To access the spare wheel
Lift the boot fl oor by means of the strap.
Anchor the strap on the roof of the boot.
To remove the spare wheel, detach the belt then push the wheel for-
wards so as to be able to lift it.
TO REPOSITION THE SPARE WHEEL
To put the spare wheel back in the boot
Position the spare wheel fl at in the boot, then pull it towards you.
Next place the toolbox inside the wheel, then secure the assembly with
Release the strap to return the boot fl oor to its initial position.
Tyre pressures are indicated on the label which is positioned low down on
the front pillar. See “Vehicle identifi cation” and “User Precautions”. (On this
label you will see a pressure for normal speeds and a pressure for high
Tool for removing/refi tting the
Tool for removing the anti-theft
Tool for removing foglamps
The tools are to be found in a pro-
tective holder inside the spare
wheel. Pull back the retaining strap