CITROEN C6 2007 - Trip Computer

62
II
T R I P C O M P U T E R
OPERATION
For selection and display of the
various types of information, give
short presses on the end of the
windcsreen wiper stalk.
Press on the “
TRIP
” button on the
radio panel, for permanent display
of the trip computer information.
To reset the trip computer infor-
mation to zero,
keep the end of
the control stalk pressed for a few
seconds when you see the relevant
information displayed.
The trip computer gives you access to:
Three
types of instantaneous information:
Range.
Instantaneous
consumption.
Distance
remaining to be travelled.
Three
types of information for two Journeys 1 and 2:
The
distance travelled.
Average
consumption.
Average
speed.
The Journeys
Journeys
1
and
2
are independent of each other but identical in use.
For example you can allocate Journey
1
to daily calculations and Jour-
ney
2
to monthly calculations.
Resetting a Journey to zero
When the desired Journey is displayed, give
a long press
on the end
of the wiper control stalk.
Information
concerning your vehicle
The
oil temperature (for NaviDrive display only).
The
coolant temperature.
The
tyre pressures.
•
-
-
-
•
-
-
-
•
-
-
-