I N S T R U M E N T PA N E L
If you use your vehicle in par-
ticularly diffi cult conditions,
service schedule for “special con-
ditions” comprising shorter inter-
vals between services. See “Main-
Your CITROËN technician resets
the indicator to zero after each
service. However, if you do your
own servicing, the procedure for
resetting to zero is as follows:
until the screen indicates “
and the maintenance symbol
between two oil changes is
reached before the mileage
has been covered, the mainte-
nance spanner lights up and the
instrument panel indicates “
instrument panel indicates “
instrument panel indicates “
When the driver's door is opened
or the vehicle is unlocked with the
remote control, for around 30 sec-
onds there is display of the
Trip mileage recorder reset
This can operate when the ignition
If the fuel low warning lamp comes
on permanently on horizontal
ground, accompanied by a sound
signal, there remain around
When the second-to-last bar dis-
appears, you still have approx.
When you approach maximum
engine speed, crossing into the red
zone indicates the need to engage