CITROEN C6 2007 - Page 152

155
VI
V E RY C O L D P R O T E C T I O N
After fi tting
Before fi tting
FITTING/REMOVAL OF THE
SNOW-GUARD
Fitting
Clip the snow-guard onto the ribs
of the bumper.
Removal
To detach the snow-guard, slide
the tool
4
into the recesses in the
snow-guard and lift.
Note:
The tool
4
is to be found
4
in the protection box in the spare
wheel. See “Changing a wheel”.
The snow-guard delivered with the vehicle (according to
destination) should be fi tted during the winter period, but
removed for the remainder of the year.
It is essential to remove it whenever the temperature is above
10 °C.