After inserting a CD, with the printed
side facing upwards, the player will
start playing the CD automatically.
To change manually to CD source
(CD already inserted), press but-
until you obtain the source
You can also do this by means of
the audio system will automatically
If the CD is not removed within 10
to 15 seconds of being ejected, it
will automatically be taken back
into the CD player, although it will
the beginning of the track currently
being played, press a second time
to go back to the start of the previ-
Press the buttons successively to
skip several tracks at a time.
This can also be done via the con-
. As the list of tracks is dis-
played on the screen, select the
desired track using buttons
then validate using button
You can also do this via the con-
To move swiftly through the CD,
press and keep pressed button
, respectively for fast forward
or rapid reverse with accelerated
Play resumes as normal when the
This menu allows activation/deac-
(approx.) of each track of the
This can be accessed in two
and proceeding as for Scan-
ning of RDS stations – the sub-
menu for Audio Preferences.
source, by pressing onbutton
You can then access the Audio
If one of these options is
active, it remains active for CD
For safety, do not use a CD player
if the cabin temperature is higher
than +60 °C or lower than -10° C.
If the temperature becomes too
high, an automatic safety device
will prevent the CD player from
working until an acceptable tem-
kept of dust. Avoid touching the
disc surface as any scratches
may adversely affect the sound
not attach any stickers to
not expose them to heat or
If the surface of the compact disc
is dirty, it can be wiped with a soft,
clean cloth. Always wipe from the
centre of the disc outwards.