CITROEN C6 2007 - BLUETOOTH CONNECTIVITY; TWINNING A TELEPHONE; CONNECTING A TWINNED TELEPHONE

125
IV
B L U E T O O T H
®
Note
:
Refer to the user instructions to
familiarise yourself with the features of
twinning.
The
telephone detects the Blue-
he
tooth
®
tel
tel
system on your vehicle. “
®
C6
system on your vehicle. “
system on your vehicle. “
”
displays on your telephone.
You should then select “
C6
” on your
telephone controls. Next you have
to accept or decline this twinning.
Note:
If the 4 twinning memories are
already being used, you must select
a memory that is already attributed
although the telephone twinned to this
location will no longer be.
Next
the telephone asks you to enter
xt
an identifi cation code:
1234
.
Validate.
Note:
This entry may be demanded
earlier in the twinning sequence.
The telephone is now twinned to
your Bluetooth
®
telephone is
telephone is
system. For imme-
®
diate access to the Bluetooth
®
imme-
imme-
functions, it may be necessary to
make a connection (see following
page
Confi guration : Connecting
a twinned mobile telephone
).
Once the twinning is fi nished, you
will be able to connect your tele-
phone via the “
Main menu
”.
•
•
•
CONNECTING A TWINNED TEL-
EPHONE
Each time you enter the vehicle, after
switching on the audio system, your tel-
ephone is detected automatically. If more
than one telephone is present, the last tel-
ephone to have been connected is the first
to be recognised.
Note:
Disconnections may occur. You
may have to make a new connection (see
following page,
Configuration : Con-
necting a twinned mobile telephone
).
one
one
Remarks:
In
the event of a problem, it is recom-
In
mended to switch your telephone off
and then on again.
If
you switch off your telephone within
If
the field of reception of the Bluetooth
®
within
within
toothtooth
system on your vehicle, the next
connection will not be automatic. To
restore automatic connection, you
will have to connect your telephone
manually(see following page,
Con-
figuration : Connecting a twinned
mobile telephone
).
If
you are already in telephone com-
If
munication when the audio system
is turned on, the latter detects the tel-
ephone.
To
avoid interference, you are advised
To
not to place your mobile telephone
close to your radio.
TO ACCEPT AN INCOMING
CALL
Use button
L
.
•
•
•
•
Your audio system may be BLUE-
TOOTH
®
our audio
our audio
compatible. It allows you
®
to connect a
mobile telephone
for
use “
hands free
” and even to use
its directory.
It permits you to twin up to four tel-
ephones, to be able then to con-
nect whichever one you choose.
The Bluetooth
®
functions available
®
and the content of the display are
dependent on the type of mobile
telephone, its settings and the type
of contract you have. For this rea-
son it is advisable to make enquir-
ies with your telephone provider.
Prior to any operation:
Your
display should be lit up
our
(key in position
M
).
Your
telephone's Bluetooth
our
®
system must be activated.
TWINNING A TELEPHONE
Twinning a telephone consists of
having it recognised by the BLUE-
TOOTH
®
having it recognised
having it recognised
system on your vehicle.
®
This then permits an instantane-
ous connection.
Twinning can only be performed
with
ignition switched on, display
illuminated, engine stopped
. No
other telephone should be con-
nected.
The
twinning must be performed
with the telephone and its Blue-
tooth
®
with the
with the
system activated.
®
•
•
•