A U T O M AT I C G E A R B O X
The engine can only be started when the lever is at position P or N.
A safety device ensures that starting is impossible in the other positions.
After starting the engine, with selector on
, depress the brake pedal then
to change to manual mode.
(driving in automatic mode) to position
ing in sequential mode) or vice versa can be made at any time.
USING THE AUTOMATIC GEARBOX
To avoid any movement of the vehicle when parked, select position
. Only engage it when the vehicle is
completely stationary. In this position the driving wheels are locked.Check that the selector is in the correct
position. Apply the electric parking brake fi rmly.
Do not engage until the vehicle is stationary, foot on brake. To avoid gearbox snatching, do not accelerate
immediately after the selection.
(except in absolute neces-
not select position N if the vehicle is moving (except
select positions P or R if the vehicle is not com-
If while the vehicle is moving you inadvertently select posi-
tion N, leave the engine to idle before engaging position D