CITROEN C8 2002 - Valve Timing Specifications; Camshaft Identification and Timing Belt; Valve Clearances

SPECIAL FEATURES: VALVE TIMING
Engines : RFN - 3FZ
The camshafts are referenced following two methods.
- (1) Marking position (2) Paint rings.
- (3) Marking position (4) Marking at end of shaft.
- (5) Target for camshaft position sensor.
Marking position:
(1) Paint ring : Repair reference.
(2) Green paint ring : Factory reference.
(3) Inlet D1309 : Exhaust D1348.
(4) Inlet 96 332 713 99 : Exhaust 96 3425433 99.
Timing belt.
Width : 25.4 mm
Number of teeth : 153
Material : HSN
Valve clearances when cold
Inlet (A) : NON adjustable
Exhaust (E) : NON adjustable
16
B1EK1UCD
ENGINE