21
SPECIAL FEATURES : TIGHTENING TORQUES (m.daN)
Engine : XFW
Lubrication circuit
Oil sumpLubrication circuit.
(22) Oil separator : 0.8
(23) Strainer : 0.8
(24) Induction pipe : 0.8
(25) Drain plug : 3 ± 0.3
(26) Oil filter sleeve (with coolant/oil exchanger) : 0.5
Oil filter : 0.2
Stage 1 : Do up bolts 13,15 and 17.
Stage 2 : Tighten bolts 13,15 and 17 to : 0.2
Stage 3 : Do up the 17 remaining bolts.
Stage 4 : Tighten the remaining bolts to : 0.5
Stage 5 : Tighten all the bolts : 0.8
Stage 6 : Repeat the tightening a few times in the same order to obtain
a tightening torque of 0.8 m.daN on all the bolts.
B1BK24WD B1BK24XD
ENGINE
Respect the sequence of stages and the order of tightening
To Next Page
Loading...
