22
SPECIAL FEATURES : TIGHTENING TORQUES (m.daN)
Engine : XFW
Cooling circuitLubrication circuit
Coolant pumpOil pump
Stage 1 : Position the screws and do them up by hand.
Stage 2 : Pre-tighten the screws : 0.5
Stage 3 : Tighten the screws : 0.8
Stage 4 : Repeat the tightening a few times in the same order to obtain
a tightening torque of 0.8 m.daN on all the screws.
Stage 1 : Position the screws and do them up by hand.
Stage 2 : Pre-tighten the screws : 0.5
Stage 3 : Tighten the screws : 0.8
Stage 4 : Repeat the tightening a few times in the same order to obtain a
tightening torque of 0.8 m.daN on all the screws.
B1BK3B6D B1BK3B7D
Respect the sequence of stages and the order of tightening
ENGINE