CITROEN C8 2002 - 3 FZ Valve Timing: Tools and Removal; Tools for Valve Timing; Valve Timing Removal Procedure

45
CHECKING AND SETTING THE VALVE TIMING
Engine : RFN
Positioning the crankshaft.
NOTE : This operation positions all the pegs in their respective pegging points.
Peg:
- The camshaft pulleys, using tool [2].
- The crankshaft, using tool [1].
If this is not possible, reposition the flange (17).
IMPERATIVE : This operation guarantees the setting of the timing for subsequent operations.
Slacken the screw (16) so as to free the crankshaft pinion (17).
Bring the flange (17) to the pegging point, using tool [5].
Position tool [1].
Tightening of screw (16) (Tool FACOM D360).
Tighten to : 4 ± 0.4 m.daN
Angular tighten to : 53°±5°.
Remove tools [1], [2] and [5].
IMPERATIVE : When tightening screw (16), hold the pulley (17) in position, using tool [5].
B1EK1TBD
B1EK1TCD
ENGINE