CITROEN C8 2002 - 3 FZ Valve Timing: Tool Positioning and Slackening; Positioning Tool [4]; Slackening Screw (10)

47
CHECKING AND SETTING THE VALVE TIMING
Engine : 3FZ
Tools.
[1] Crankshaft setting peg : (-).0189-B
[2] Exhaust camshaft setting peg : (-).0189-AZ
[3] Inlet camshaft setting peg : (-).0189-L
[4] Positioning peg : (-).0189-J
[5] Tool for immobilising hub : 6310-T
[6] Belt retaining pin : (-).0189.K
[7] Engine support crossmember : 4090-T
Removing.
Disconnect the battery.
Remove:
- The under-engine shield.
- The auxiliary drive belt (see corresponding operation).
Uncouple the exhaust line (to avoid damaging the flexible pipe).
Position the tool [7].
Move aside:
- The fuel delivery pipe.
- The canister purge electrovalve.
- The expansion chamber.
B1EK0V1D
B1EK1SJD
B1EK1SLD
ENGINE