54
CHECKING AND SETTING THE VALVE TIMING
Engine : XFW
Removing (continued).
Remove:
The twelve screws (3) (6 mm external hexagonal adaptor).
The seven screws (4) (7 mm external hexagonal adaptor).
The two covers (5).
The cover (6).
The fixing screws of the power steering pump, then suspend the latter.
The support (7).
NOTE : The camshaft pegging operation can be performed without slackening the
pinion screws or rotating the camshafts (using tools [5] and [6]; lightly oil the pegs
[1] and [2] prior to fitting.
Peg in the sequence:
Camshafts, using tool [1].
Crankshaft, using tool [2].
B1EK005D
B1EK006D
B1EK007D
ENGINE
To Next Page
Loading...
