CITROEN C8 2002 - RHT-4 HW Valve Timing: Removal and Pegging; Component Removal for RHT-4 HW Engine; Crankshaft Turning and Pegging

62
CHECKING AND SETTING THE VALVE TIMING
Engines : RHT-4HW
Removing.
Remove:
- The closing panel of the clutch casing (block the engine flywheel, tool [5]).
- The auxiliary drive pulley screw.
Refit the screw without the washer.
Remove:
- The auxiliary drive pulley, using tool [8].
- The tool [5].
Turn the crankshaft.
Peg:
- The engine flywheel, tool [2] (engine DW12TED4).
- The engine flywheel, tool [9] (engine DW10ATED4).
B1EK0TVC
B1EK1T4D
B1EK0TUC
ENGINE