CITROEN CX 2000 - Page 255

VEHICLE HEIGHTS
13454
- Front height measured from point SG a 8) of the subfrome.
to the surface on which the vehicle is stondinq
_ Rear height measured from point (, b )B of the subfrome
to the surface on which the vehicle is standinq
Calibration pressures : FRONT REAR
\// \~~lr~r,,i J v/xii /c,.5 I:\lol,‘s
_ Identification mark on filler plug
75 40 35
- Calibration pressure ( /or rhc’rkiqg 1.
75 2 bars 40 2 bars
- 27 - 15
35 1 ;, bars
(1088 _ ;;,
P51 1 (580 : ;;, P51 i ( 508; :',, PSP 1
Dampers
- They are incorporated in the pneumatic units
NOTE The front and rear dampers ore different on CX 2400 GTI
vehicles and therefore the pneumatic units are
PNEUMATIC UNITS :
Volume of front units i Soloor,\ mid I:s/fll<,s 1
500 cc f Pressed steel type )
Volume of rear units
i
All Saloons 500 cc ‘j Pressed steel type)
Estates 700 cc (Screwed in type i
I
specific.
Suspension cylinders :
Diameter of pistons
,,,,
Height corr&tors : Identical front and rear
Anti-roll bar :
23 mm i lisfoir~s mid o/l Salormc <~,c,,,,, ( Y ‘Xl(i VII I
Diameter of front anti-roll bar.
i
24 mm , (.\ 2400 (.‘/I J
Diameter of rear anti-roll bar 17.5 mm
NOTE The rear anti-roll bar on Estates and on Saloons is different.