212
CLUTCH
GEARBOX
DRIVESHAFTS
GEARBOX CONTROLS - 4 HP 20 AUTOMATIC GEARBOX
Engines : XFZ
Adjusting the selection mechanism.
- Put selection lever (5) in position : parking.
- Untighten nut (2) and the lock nut (4) on either side of the linkage (3)
so as to connect the ball-joint (1) to the selector.
- Apply grease G9.
- Tighten the nut (2) and the lock nut (4) to 1 m.daN.
B2CP37FD
4 HP 20
XANTIA - XM