ENGINE
90
CHECKING AND SETTING THE VALVE TIMING
Engines : LFY - RFV # 11/97 (continued)
RFVLFY
B1EP11WC B1EP08WC
TENSIONING THE TIMING BELT
- Rotate :
Engines LFY - RFV = 2 turns of the crankshaft.
- Peg the crankshaft at (2).
- Loosen the six screws (4) of pulleys (7) and (8).
- Peg the hubs at (3).
(If necessary, turn the camshaft by the screw (5)).
- Desserrer le galet (6).
- Poser l’ortil 4122-T.
- Effectuer une tension de :
- Tighten the roller (6) to 2 m.daN.
- Remove the tools.
Engines LFY - RFV
26 SEEM unitsNew belt
To Next Page
Loading...
Need help?
General
