Hydraulic / Electric System LINER TIC
4-20 10/04
1.3.4 Working with the
rear rotors only
Application:
• for work on narrow plots of land
• for depositing lighter swaths
Operation: First press key 9.
Now press key 7.
The front rotors remain raised, the rear rotors are lowered to their working
position.
Now either press key 9 = all rotors are raised,
or
press key 8 = all rotors are lowered to their working position.
1.3.5 Raising the front
rotors separately
Separately raising the front rotors is only possible when using additional
equipment:
2x 812 987.1 Hose (6 m x 8 NN; 2 union nuts)
1x 904 268.0 Shut-off tap
2x 812 989.0 Coupling plug
The tractor must be equipped with a double-acting additional control unit
for each rotor.
The rear rotors cannot be raised separately.
To Next Page
Loading...
