Need help?Do you have a question about the Clack WS2 series and is the answer not in the manual?
General| Model Series | WS2 |
|---|---|
| Pressure Rating | 125 PSI |
| Metered | Yes |
| Time Clock | Yes |
| Regeneration Type | Downflow or Upflow |
| Cycle Adjustment | Yes |
| Materials of Construction | Noryl |
| Type | Water Softener |
| Flow Rate | 12 GPM |
| Control Valve | Fleck 5600 |
| Valve Size | 1" |
Details the six stages of the water softener regeneration cycle.
Covers assembling the softener unit, including pipework and vessel filling with resin.
Troubleshooting steps for when there is no water flow to the service outlet.
Troubleshooting steps for issues related to poor quality treated water.
Troubleshooting steps for when the softener fails to regenerate.
Troubleshooting steps for insufficient capacity between regeneration cycles.
To Next Page
