Need help?Do you have a question about the Clack WS1 Series and is the answer not in the manual?
General| Series | WS1 |
|---|---|
| Regeneration | Upflow |
| Certifications | NSF/ANSI 44 |
| Operating Temperature | 34 - 120°F (1 - 49°C) |
| Power Supply | 12 VAC |
| Type | Water Softener |
Details the six distinct stages involved in the water softener regeneration cycle.
Covers foundation, drainage, operating space, incoming water, and pipework requirements.
Instructions for pipework assembly, vessel filling, and resin installation.
Details the process of setting up the controller parameters for the softener.
Explains how to access and modify factory pre-set regeneration parameters.
Step-by-step guide to commissioning the water softener and filling the brine tank.
Recommendations for weekly, monthly, and annual checks to ensure proper softener operation.
Troubleshooting steps for identifying and resolving issues causing no water flow to service.
Troubleshooting steps for addressing poor water quality from the softener.
Troubleshooting steps for diagnosing and fixing problems preventing regeneration.
To Next Page
