Clack WS1 Series User Manual

WS1”, 1.5” & 2” Series Watersoftener
Installation Operation Maintenance Manual
SIMPWS1 REV3 13/07/11 PAGE 26 OF27
250 35 or 13 for WS2
350 49 or 16 for WS2
500 70 or 26 for WS2
750 105 or 37 for WS2
Salt Saturator 1 When softener is connected to a
Salt Saturator then a refill time of
1 minute and the smallest brine
refill button is used
Capacity 25 1.25
30 1.5
50 2
75 3.75
100 5
120 6
150 7.5
250 12.5
350 17.5
500 25
750 37.5
Resin Capacity this is used with
the hardness input to give
capacity in m3
Regen AUTO Capacity automatically calculated
Regen Regen will occur at the specified
time post the capacity has been
used up
SALT Off N/A

Clack WS1 Series Specifications

General

Series	WS1
Regeneration	Upflow
Certifications	NSF/ANSI 44
Operating Temperature	34 - 120°F (1 - 49°C)
Power Supply	12 VAC
Type	Water Softener