14 ARX8570z
Radio Operations
Tape Operations
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 stations cannot be received, a previously
stored station remains unoverwritten at the
memory position.
1. Press BND button @ and select the desired
band (FM or AM).
2. Press and hold AS button 5 for 2 seconds or
longer. The stations with good reception are
stored automatically to the Preset buttons 9.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful when
searching for a desired station in memory.
1. Press PS button 5.
2. When a desired station is tuned in, press PS
button 5 again to continue receiving that sta-
tion.
Note:
• Be careful not to press and hold PS button
5
for
2 seconds or longer, otherwise the auto store func-
tion engages and the unit starts storing stations.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
● ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold ISR button ! for 2 seconds
or longer.
● Recalling a station with ISR
In any mode, press ISR button ! to turn on the
radio function and tune the selected radio sta-
tion. “ISR” appears in the display. Press ISR but-
ton ! again to return to the previous mode.
Loading a tape
1. Press OPEN button 1 to access the cassette
tape insertion slot behind the FLIP DOWN
PANEL.
2. Load a tape into the cassette tape insertion
slot. “LOADING” appears in the display and
starts playing.
∗ When a metal or chrome bias (70µ sec) tape is
inserted, the metal tape setting is selected auto-
matically.
3. Close the FLIP DOWN PANEL.
CAUTION
.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FILP DOWN PANEL does not open fully, gen-
tly open with your hand.
• Do not leave the FLIP DOWN PANEL open. Be
sure to close it to avoid any possible mechanical
damage.
• Do not put your hands, fingers or foreign objects
into the cassette tape insertion slot.
• When a tape has already been loaded in the cas-
sette tape insertion slot, another one cannot be
inserted into it. Never try to insert another tape
forcibly.
Listening to a tape already inserted
Press FNC button 3 to select the tape mode.
The tape starts playing automatically. If no tape
is loaded in the unit, “NO CASSETTE” appears
in the display.
Pausing tape play
1. Press Play/pause button 2 to pause tape
playback. “PAUSE” appears in the display.
2. Press Play/pause button 2 again to resume
tape playback.
Ejecting a tape
1. Press OPEN button 1 to access the cassette
Eject button & behind the FLIP DOWN
PANEL.
2. Press Eject button & to eject a tape and take
it out.
3. Close the FLIP DOWN PANEL.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
To Next Page
Loading...
