Satellite Radio Mode
LOCK
Refer to System Setup page 11.
UNLOCK
Refer to System Setup page 11.
HD Radio Operations
About
HD Radio™ Technology
HD
Radio Technology allows CD-quality
digital broadcasting of your local AM and
FM
radio stations. HD Radio broadcasts
can include multiple channels on the same
frequency, which is called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1-HD8.
With
an
HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers
HD
Radio Technology.
NOTE: Not
all
FM
or
AM
stations
offer
HD
Radio (digital) broadcasting. You can
receive both analog
and
digital
stations
with the unit.
Accessing radio
mode
Press the [SRC I
<!>
] button on the front
panel or remote control to switch to the HD
RADIO source, and HD icon will illuminate.
Select a
band
Press the
[BAND]
button to change between
three
FM
and one AM bands. Each band
stores up to six preset stations.
Tuning
- Seek Tuning
Press and hold the [
~~I
] or [
1<IIIl<llll]
button to
seek the nexVprevious station automatically.
- Manual Tuning
Press the [
~~I
] or [
1<IIIl<llll
] button to move
the radio frequency number up or down one
step.
UNSKIP
Refer to System Setup page 11.
HD Radio
multicast
channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[MENU] button on the panel. PTY and SUB
CH
are displayed. Select PTY or SUB CH by
rotate [VOLUME] knob and push to confirm.
• Select PTY type from the category list by
rotate [VOLUME] knob and push.
• Select SUB CH by rotate [VOLUME] knob
and push.
• Multi channel is available when a digital
signal
is
detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset
stations
Up to six stations on each band can be
stored as presets, which can then be
instantly recalled
by
pressing the associated
preset button. To store a station, turn the
radio on and select the desired band and
station. Press and hold the desired preset
button (numbered one through six on the
face of the radio or remote control) for more
than 1 seconds. When stored, the preset
number will appear in the display. The
station is now stored and can be recalled by
pressing the corresponding preset button.
Repeat for the remaining five presets on the
current band and for presets on the other
four bands.
NOTE: Multicast
stations
can be
stored
as
presets,
but
the
unit
must
be in Digital
or
Auto
reception
mode
to receive them.
CZ301
15
To Next Page
Loading...
Need help?
General
