Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it
in
the safety place and prevent scratches.
We recommend taking the DCP
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1.
Press the [ SRC
1<.9]
button
(1
sec.) to
turn off the power.
2.
Deeply push
in
[OPEN] button to unlock
the DCP.
3.
Hold the side popped out, remove the
DCP.
Attach the DCP
1.
Hold the DCP and ensure that the panel
faces towards you. Set the right side of
the DCP into the DCP bracket.
2.
Press the left side of the DCP until it locks.
Storing the DCP in the DCP Case
Hold the DCP, as shown
in
the figure below,
and put it into the supplied DCP case.
A CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
• Once the
[OPEN] button
is
pressed and
DCP is unlocked, car vibrations can cause
the DCP to fall
• The connector for the main unit and DCP
is extremely important.
Be
careful not to
damage it by pressing on it with fingernails,
screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a
soft, dry cloth only.
6
CZ301
To Next Page
Loading...
Need help?
General
