USB Devices
Problem
Cause
Measure
The USB device has been Reversing the connection direction of the USB
USB device cannot
inserted with wrong direction. device, try it again.
be inserted.
The USB connector is broken. Replace with a new USB device.
USB device is not
The USB device is damaged.
Disconnect the USB device and reconnect.
If
the
device
is
still not recognized, try replacing with a
recognized.
Connectors are loose.
different USB device.
No sound heard with
No MP3IWMA file is stored
in
the
the display "No File"
USB device.
Store these files properly in the USB device.
shown.
Sound skips
or
is MP3IWMA files are not encoded
Use MP3IWMA files encoded properly.
noisy.
properly.
7. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display Cause Measure
Disc
is
inserted incorrectly. Eject the disc then reload it properly.
ERROR 3
The disc format is not supported. Try another disc.
ERROR 5 This is a failure of deck's mechanism. Consult your store of purchase.
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
24
CZ301
To Next Page
Loading...
