Clarion CZ501E User Manual

8
English
Remote Control (RCX002)
Notes of remote control using
Inserting the Battery
1. Slide remote control unit’s rear cover in
the direction shown.
2. Insert battery (CR2025) into insertion
guides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
1. Aim the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3. DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4. Use “button shaped” lithium battery
“CR2025” (3V) only.
5. DO NOT subject battery to recharge,
disassemble, heat or dispose in re or water.
6. Insert the battery in proper direction
according to the (+) and (-) polarities.
7. Store the battery in a place where children
cannot reach to avoid the risk of accident.
[SRC]Button
• Toggle the audio source
[
, ]Buttons
• Preset station up/down
• Previous/next track
• Search (long press)
[PS/AS/SCN]Button
• Scan play / Preset scan
• Auto memory store (long press)
[BAND/TOP]Button
• Select tuner band
• Top play (long press)
[ , ]Buttons
• Volume up / down
[ ]Button
• Play / Pause
[TA]Button
• Trafc announcement
[DISP]Button
• Display switch
[PTY/RDM]Button
• Programme type
• Random play
[AF/RPT]Button
• Alternative frequency
• Repeat play
[MUTE]Button
• Mute the volume
Insertion guide
[,]
[ ]
[DISP]
[,]
[MUTE]
[SRC]
[BAND/
TOP]
[TA]
[PTY/RDM]
[AF/RPT]
[PS/AS/
SCN]
Downloaded from Caradio-Manual.com Manuals

Clarion CZ501E Specifications

General

Brand	Clarion
Model	CZ501E
Category	Car Receiver
Language	English