Basic
Operations
2 Press the SEARCH button
[HI
and select from
"TREB
~GAIN
~"
-.
"TREB
~F
12K~"
-.
"TREB
~GAIN
~"
3
Turn
the Rotary knob
[1]]
clockwise or coun-
terclockwise as needed and adjust the gain
and the F (center frequency)
TREB GAlN
-6
to 6 (The factory default
setting is "0")
TREB F
8KHz/12KHz
(The
Factory
default setting
is
"12K")
4 When the adjustment
is
complete, press A-M
button
[1l]
several times until the function mode
is
reached
Adjusting
the balance
1 Press A-M button
[1l]
and select "BALANCE"
2 Turning the Rotary knob
[1]]
clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker
*The factory default setting is "0" (Adjustment
range: L13 to R13)
3 When the adjustment is complete, press A-M
button
[1l]
several times until the function mode
is reached
Adjusting
the fader
1 Press A-M button
[1l]
and select "FADER"
2 Turning the Rotary knob
[1]]
clockwise empha-
sizes the sound from the front speakers, turn-
ing it counterclockwise emphasizes the sound
from the rear speakers
*The factory default setting is "0" (Adjustment
range: F12 to R12)
3 When the adjustment is complete, press A-M
button
[1l]
several times until the function mode
is
reached
Adjusting
the
Beat
EQ
1 Press BEQ button
00
and select the Beat
EQ
mode
(1
to
3)
to adjust
2
Press
A-M button
[1l]
and
select
"BASS
BOOST
or
IMPACT
or
EXCITE"
3 Turning the Rotary knob
[1]]
clockwise adjusts
in
the + direction, turning it counterclockwise
adjusts
in
the - direction
* When BASS BOOST is selected, you can ad-
just the bass
in
the range of
-3
to 3
*When IMPACT and EXCITE is selected, you can
adjust the bass and treble
in
the range of - 3 to 3
12
DXZ715/HX-D10
4 When the adjustment
is
complete, press A-M
button
[1l]
several times until the function mode
is reached
Turning
on/off
the
loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone When you
are listening to music at a low volume, it
is
rec-
ommended to use the loudness effect
1 Press and hold LOU
0 button
[j1]
for 1 second
or longer to turn
on
the loudness effect When
the loudness effect is turned on,
"LO"
lights
in
the display
2 Press and hold LOU
0 button
[j1]
for 1 second
or longer to turn off the loudness effect
"LO"
goes off
in
the display
Note:
• When using
a sold separately digital sound pro-
cessor (DPH910),
a feature called auto loudness
is
selected This function
is
different from the loud-
ness effect For further details
on
the auto loud-
ness feature, refer
to
the subsection "Output
ad-
justment
of
auto
loudness,
subwoofer
and
playback
band"
in
section
"AC
Processer
Operations"
To Next Page
Loading...
Need help?
General
